Ver 1.0.0.1
Since 1988
4
6. Bluetooth Settings to Get on Line with BT Access Point for PC/NBs
To have a communication with EDGE Super Router via Bluetooth connection, you should also
plug the Bluetooth dongle into the USB connector on your PC/NB if your PC/NB does not
support the Bluetooth function. Your PC/NB will be able to access the Internet wirelessly via the
Bluetooth offered by EDGE Super Router if the connection is successfully created by following
the procedures listed below step by step.
1) Install the Bluetooth application software that can support the creation of Bluetooth
connection, for example, IVT BlueSoleil AP. And you will see an icon standing for Bluetooth
located at the bottom-right corner on your screen if the installation is successful.
2) Right click on this icon to turn on the Bluetooth function by choosing
Turn on Bluetooth
function from the pop-up menu.
(Note: A viewing mode will also be changed as the following figure when you choose
Display Classic View
mode from this pop-up menu. At this time, all Bluetooth
devices that have been automatically searched will also appear.)
3) Right click on the icon belonging to EDGE Super Router,
and select
Pair
function from the pop-up menu to create
the paired relationship. Input the
Bluetooth Pin Code
(Default: 111111) you had set up for EDGE Super
Router as Bluetooth Passkey for the authentication. (For
more details about Bluetooth Pin Code, please refer to
the “LAN Settings” section of our EDGE Super Router
user’s manual)
4) When the pair is established successfully, you will be able to
build a Bluetooth connection between your PC/NB and EDGE
Super Router. Please also right click on the
icon belonging to EDGE Super Router, and
select
Connect Bluetooth Personal Area
Network
function from the pop-up menu. The
Bluetooth Personal Area Network connection
will start to connect.
