3J EDGE Super Router Quick Installation Manual Download Page 1

Page: 1 / 5

Ver 1.0.0.1

Since 1988

Quick Installation Guide for EDGE Super Router

1. EDGE Super Router Packing List :

Before you start installing EDGE Super Router, please verify that the package contains the

following items:

One Set of EDGE Super Router

1x Power Adapter

1x 3G Antenna

External 3G Antenna with 3M Antenna Cable (Optional)

1x RJ45 Cable

1x Bluetooth Dongle

User’s Manual and this Quick Installation Guide

NOTE: Please notify your sales representative immediately if any items listed above is missing or damaged.

2. Hardware Connection Settings for the EDGE Mode

(Please skip this section if you would like to use the Dongle mode connection. For more details about the mode

switching, please jump to Section 4.)

1) Plug the Bluetooth dongle into the BT connector on your EDGE Super Router.

2) Connect PC to LAN port of your EDGE Super Router using a RJ45 cable.

3) Screw the antenna to 3G ANT SMA connector on your EDGE Super Router.

4) Make sure the SIM card has inserted to the SIM card slot on your EDGE Super Router, and

the EDGE Super Router is ready as well.

5) Connect the power cable to the power connector of your EDGE Super Router.

Summary of Contents for EDGE Super Router

Page 5: ...r to default The button is located at the front panel of EDGE Super Router See the figure below Reset steps are as follows 1 Plug in the power cable 2 Wait about 40 60 seconds to have the system powered on 3 Press the RESET button and keep it pressed about 5 second 4 Release the button Except POWER LED and LAN 100 10 LED all LEDs will be off RESET Button ...