3idee Q-E32003R Assembly Instructions Download Page 3

Page: 3 / 5

Assembly

instructions

Step 4

For the next step, we first need to prepare the screws. To do
this, please put 1 washer on each screw as shown. (Figure 4)

ATTENTION:

Use screw pack

Figure 4

Step 5

Now we screw the 3idee VESA adapter to the BenQ monitor
with the 6x ( washers) we prepared in

step 4

(Figure 5)

ATTENTION:

Use screw package

Figure 5

Step 6

Please check again if all screws are tightened correctly.
(Figure 6)

Figure 6

Summary of Contents for Q-E32003R

Page 1: ...llowing BenQ products benq com EX3203R The VESA adapter allows you to conveniently mount your BENQ brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 2: ...ning and removing the cover and the 6 screws on the back The monitor should now be ready for mounting the 3idee VESA adapter Figure 1 Figure 1 Step 2 Now the VESA adapter must be levered into the monitor as shown Figure 2 Figure 2 Step 3 Please check if the 2 small lugs on the adapter are properly seated in the recesses on the monitor Figure 3 Figure 3 ...

Page 3: ...her on each screw as shown Figure 4 ATTENTION Use screw pack A Figure 4 Step 5 Now we screw the 3idee VESA adapter to the BenQ monitor with the 6x screws washers we prepared in step 4 Figure 5 ATTENTION Use screw package A Figure 5 Step 6 Please check again if all screws are tightened correctly Figure 6 Figure 6 ...

Page 4: ...Assembly instructions Step 7 We recommend that you carry out this step with a second person Now take the monitor VESA adapter and screw it to your VESA arm Figure 7 ATTENTION Use screw package B Figure 7 ...