3idee hp27-o VESA Adapter Assembly Instructions Download

Page: 4 / 5

Assembly

instructions

Step 7

Once you have completed the last step, please check if all
screws are tightened. (Figure 6)

Figure 6

Step 8

Plug the monitor onto the adapter so that it audibly clicks
into place. (Figure 7)

Note:

Apply some pressure if necessary

Figure 7

Step 9

Please check again if the VESA adapter is properly snapped
into your monitor and all screws are properly tightened
(Figure 8).

Figure 8

Summary of Contents for hp27-o VESA Adapter

Page 1: ...products from hp hp com OMEN 27 Gaming Monitor The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 2: ...r if it is already attached Simply use the click mechanism on the monitor mount and pull the foot upwards Step 2 Now put your stand down securely and remove the holder which is attached to the side with 2 small screws Simply unscrew these 2 screws Figure 1 Figure 1 Step 3 Now pull off the shot to the top we will need this again in the next step Figure 2 Figure 2 ...

Page 3: ...to the VESA adapter Figure 3 Figure 3 Step 5 Now take the included 2 small screws and attach the mount to the 3idee VESA adapter Figure 4 Please do not tighten the screws too much otherwise the thin mount from HP can crack Figure 4 Step 6 Mount the 3idee VESA adapter to your monitor arm or directly to the wall Figure 5 Figure 5 ...

Page 4: ...tightened Figure 6 Figure 6 Step 8 Plug the monitor onto the adapter so that it audibly clicks into place Figure 7 Note Apply some pressure if necessary Figure 7 Step 9 Please check again if the VESA adapter is properly snapped into your monitor and all screws are properly tightened Figure 8 Figure 8 ...