3idee hp27-o VESA Adapter Assembly Instructions Download

Page: 1 / 5

www.3idee.eu

hp27-o VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following products from hp
(hp.com):

OMEN 27 Gaming Monitor

The VESA adapter allows you to conveniently mount your HP brand monitor to a
monitor arm with a VESA hole pattern

(75 x 75mm

). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels

(not included

Summary of Contents for hp27-o VESA Adapter

Page 1: ...products from hp hp com OMEN 27 Gaming Monitor The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 2: ...r if it is already attached Simply use the click mechanism on the monitor mount and pull the foot upwards Step 2 Now put your stand down securely and remove the holder which is attached to the side with 2 small screws Simply unscrew these 2 screws Figure 1 Figure 1 Step 3 Now pull off the shot to the top we will need this again in the next step Figure 2 Figure 2 ...

Page 3: ...to the VESA adapter Figure 3 Figure 3 Step 5 Now take the included 2 small screws and attach the mount to the 3idee VESA adapter Figure 4 Please do not tighten the screws too much otherwise the thin mount from HP can crack Figure 4 Step 6 Mount the 3idee VESA adapter to your monitor arm or directly to the wall Figure 5 Figure 5 ...

Page 4: ...tightened Figure 6 Figure 6 Step 8 Plug the monitor onto the adapter so that it audibly clicks into place Figure 7 Note Apply some pressure if necessary Figure 7 Step 9 Please check again if the VESA adapter is properly snapped into your monitor and all screws are properly tightened Figure 8 Figure 8 ...