3idee hp-s Assembly Instructions Manual Download Page 6

Page: 6 / 7

Assembly

instructions

Assembly Instruction

Step 1

Remove the base of your monitor if it is already attached.

Step 2

Figure 1

Slide the 3idee VESA adapter into the monitor from below so
that the metal tabs almost completely disappear into the
monitor. (Figure 1)

Step 3

Figure 2

This is what the correct position should look like. (Figure 2)

Step 4

Figure 3

Now screw the included M4x10 screw through the VESA
adapter into the monitor using a Phillips screwdriver to
connect them together. (Figure 3)

Summary of Contents for hp-s

Page 1: ...owing products from hp hp com ENVY 27s The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 4: ...4 Assembly instructions Scope of Delivery Accessories 4x M4x14 screw with cross recess SP10 1x M4x10 screw with cross recess SP10 ...

Page 6: ...A adapter into the monitor from below so that the metal tabs almost completely disappear into the monitor Figure 1 Step 3 Figure 2 This is what the correct position should look like Figure 2 Step 4 Figure 3 Now screw the included M4x10 screw through the VESA adapter into the monitor using a Phillips screwdriver to connect them together Figure 3 ...

Page 7: ...er with the 4 included M4x14 screws screw bag SP2 It is best to fasten 2 screws diagonally first so that the monitor cannot fall down and you can fasten the remaining screws without any effort ATTENTION Pay attention to the right screws Figure 4 Step 6 Figure 5 Please check again if all screws are tightened correctly Figure 5 Powered by TCPDF www tcpdf org ...