3idee hp-s Assembly Instructions Manual Download Page 1

Page: 1 / 7

www.3idee.eu

hp-s VESA adapter

Assembly

instructions

The VESA adapter is compatible with the following products from

(hp.com):

ENVY 27s

The VESA adapter allows you to conveniently mount your HP brand monitor to a
monitor arm with a VESA hole pattern

(75 x 75mm

). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels

(not included

Summary of Contents for hp-s

Page 1: ...owing products from hp hp com ENVY 27s The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 4: ...4 Assembly instructions Scope of Delivery Accessories 4x M4x14 screw with cross recess SP10 1x M4x10 screw with cross recess SP10 ...

Page 6: ...A adapter into the monitor from below so that the metal tabs almost completely disappear into the monitor Figure 1 Step 3 Figure 2 This is what the correct position should look like Figure 2 Step 4 Figure 3 Now screw the included M4x10 screw through the VESA adapter into the monitor using a Phillips screwdriver to connect them together Figure 3 ...

Page 7: ...er with the 4 included M4x14 screws screw bag SP2 It is best to fasten 2 screws diagonally first so that the monitor cannot fall down and you can fasten the remaining screws without any effort ATTENTION Pay attention to the right screws Figure 4 Step 6 Figure 5 Please check again if all screws are tightened correctly Figure 5 Powered by TCPDF www tcpdf org ...