4
Assembly
instructions
Assembly instruction
Step 1
Remove the base of your HP All-in-One PC by first pulling off
the base and then unscrewing the black plastic holder.
We have also published an assembly help video.
Step 2
Figure 1
Now put the 3idee VESA adapter on the metal mount and
screw it tight with the included 2 countersunk screws.
(Figure 1)
Step 3
Figure 2
This is how the mounted VESA adapter should look now.
Please make sure that you have tightened both screws.
(Figure 2)
Step 4
Figure 3
For this step we recommend a
2nd person
.
Now lift the monitor and hold it to your monitor mount.
Fasten the VESA adapter with the 4 included M4x14 screws
(screw bag: SP2)
.
It is best to fasten 2 screws diagonally first, so that the
monitor cannot fall down and you can fasten the remaining
screws without any effort.
ATTENTION:
Pay attention to the right screws!
