3idee hp-32s Assembly Instructions Download

Page: 1 / 4

www.3idee.eu

hp-32s VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following products from hp (hp.com):

32s.

The VESA adapter allows you to conveniently mount your HP brand monitor to a
monitor arm with a VESA hole pattern

(75 x 75mm

). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels

(not

included).

Summary of Contents for hp-32s

Page 1: ...ollowing products from hp hp com 32s The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 2: ...the VESA adapter onto the monitor Here the two pins yellow must connect with the adapter Figure Step 3 Please make sure that the adapter is plugged in the correct direction You can see this by aligning all holes of the adapter with the holes in the monitor green Figure Step 4 Now fasten the VESA adapter with the included 4x M4x16 screws ATTENTION Use screw package A Figure ...

Page 3: ...end a 2nd person Now pick up the monitor and hold it to your VESA adapter It is best to first fasten 2 screws diagonally so that the monitor can no longer fall down and you can fasten the remaining screws without effort ATTENTION Use screw package B Figure Step 7 Please make sure that all 4 screws are tightened firmly Figure ...