5
Assembly
instructions
Assembly instruction
Step 1
Place your HP monitor securely on a soft surface.
Now remove the base of your HP monitor if it is attached.
Step 2
Figure 1
Now insert the 3idee VESA adapter into your HP monitor as
shown. (Figure 1)
Step 3
Figure 2
The adapter should now snap into the monitor and be
mounted as shown. (Figure 2)
Step 4
Figure 3
For this step we recommend a
2nd person
.
Now lift the monitor and hold it to your monitor mount.
Fasten the VESA adapter with the 4 included M4x14 screws
(screw bag: SP2)
.
It is best to fasten 2 screws diagonally first, so that the
monitor cannot fall down and you can fasten the remaining
screws without any effort.
ATTENTION:
Pay attention to the right screws!
(Figure 3)
