Contents Overview
Seeyond Tiles (Back Side)
The back side of the partition will mainly be in clusters of 4, but for features with odd amounts of rows and columns there will be
single and double tiles. The tiles will be labeled with a Tile ID referencing location and the letter "B" (e.g. A1-B, B1-B).
Seeyond Tiles (Front Side)
The front side tiles (labeled with an “F” after the Tile ID, e.g.
A1-F, B1-F) will be as individual tiles.
Baseplates
A 3/4" thick melamine baseplate will be provided for the
partition. This baseplate will be anchored to the ground
and then the tiles attached to the baseplate. The baseplate
footprint is 3/4" less on each open side (1½" overall less than
length and width). The baseplates are not undersized on
sides that are adjacent to other baseplates.
Hardware
Outside Face of
Back Tiles
Inside Face of
Back Tiles
Outside Face of
Front Tiles
Inside Face of
Front Tiles
3/16" � 13/4" Fastener
3-15-842
Screw
3-85-15
Washer
3-85-16
Zip Tie
3-85-12
For more information, please visit 3-form.com or call 800.726.0126
June 2021 | MAn-RTG-200-49 | ReV 003 © 2021 3form, Inc. All rights reserved.
2