3e–527A3 Wireless Access Point – 8 Port
Chapter 3: Access Point Configuration
64
29000152-001 B
3e–527A3 Wireless Access Point – 8 Port
Chapter 3: Access Point Configuration
29000152-001 B
65
The random configuration file is used to update the bridging SSID
and bridging encryption on other devices using the existing bridging
link. If the bridging key or the bridging SSID is changed on the normal
configuration screen, then the bridging link to the other devices will be
terminated, and the configuration can not be updated.
To create a randomly generated bridging configuration file, click
Generate
. A new configuration is created in a temporary file and an
Install
button appears. In order to transfer this file, select the
Generated
File
radio button, check the desired recipients in the Site Map section, and
click
Apply
. After the file has been successfully transferred to the recipi-
ents (check the status field in the lower section), click
Install
to apply the
randomly generated configuration file to the AP. Once applied, the unit
will reboot and start using the new configuration file.
The automatic IP address configuration feature can be used to assign
a remote device an IP address. This feature minimizes the effort to con-
figure IP addresses in a wireless network. The IP addresses are assigned
on the private class A IP address range (10.0.0.0). By default, this feature
is enabled, so if you want to assign your own IP addresses you need to
disable this feature.
