3DV-X1
OPERATION MANUAL
www.3DMOJO.com
2
MAINTENANCE GUIDE
The following section is provided to help you with maintenance and repairs to your 3DV-X1. Pay extra attention to the
notes and tips for proper assembly.
Front Suspension Arm, Front Shock Tower,
Front Bumper
1. Attach the front bulkhead (51) to the chassis (1)
using the bulkhead hinge pin (103).
2. Secure the bulkhead hinge pin in place using the
3mm set screw (K).
3. Attach and secure the front suspension arms
(38,39) to the front bulkhead using the front inner
hinge pins (95).
4. Secure the rear of the front inner hinge pin with a
2.5mm e-clip (S).
5. Install the front bulkhead brace (50) onto the two
front inner hinge pins.
6. Secure the front bulkhead brace using 2.5mm e-
clips (S).
7. Attach the front shock tower (49) to the front
bulkhead using four 3x10mm round head screws
(C).
8.
Attach the front bumper (2) to the front bulkhead
using four 4-40x5/16" fl at head screws (B).
