Identify Panels
Before assembling the kit, lay out all the panels and identify which panel corresponds
to the front, left, right, back, and top. Although the panels are labeled, it’s easy to get
them mixed up once the covering is removed, and rarely a panel can be mislabeled.
This chart will help you keep them straight. Note that the panels are shown as they
appear if you are located on their corresponding sides, i.e., the right side is pictured as
if you were standing on the right side of the enclosure, etc.
PANEL
PICTURE
HEIGHT WIDTH
FRONT
20”
22.22”
RIGHT
20”
23”
LEFT
20”
23”
PANEL
Copyright 2023 3DUPfitters LLC
6