3DUpFitters BlazeCut Fire Extinguisher Page 4 Installation Manual Download

Page: 4 / 5

Long Blazecut Installation (T100E)

If the BlazeCut is much wider than the enclosure If your enclosure doesn't have a support bar,
the easiest thing to do is use the zip tie attachment points on the 3D UPfitters connectors as
shown below:

The included connector pieces can also be used to attach the BlazeCut on the sides.

Summary of Contents for BlazeCut Fire Extinguisher

Page 3: ...ncluded connectors we ve designed for this purpose and use the M4 screws and nuts to attach the BlazeCut to the underside of the top If you are installing your BlazeCut in your own enclosure then the included 3D UP fi tters exclusive connectors screws will allow you to put it anywhere Typically though you d want to place it directly above the parts of the 3D printer most likely to catch on fi re C...

Page 4: ...osure If your enclosure doesn t have a support bar the easiest thing to do is use the zip tie attachment points on the 3D UP fi tters connectors as shown below The included connector pieces can also be used to attach the BlazeCut on the sides Copyright 2022 3D UP fi tters LLC 4 ...

Page 5: ...am Visit the product page for the BlazeCut for a link to the STL so you can print it yourself Note you should use ABS or PETG so the connector will withstand the heat inside the enclosure The above piece replaces the existing mid panel connectors OR you can drill your own holes and place them anywhere Here s an example of a customer who located their BlazeCut o ff to the left Copyright 2022 3D UP ...

Search results

Summary of Contents for BlazeCut Fire Extinguisher

Reviews:

Related manuals for BlazeCut Fire Extinguisher

Brands by name

Popular brands

3DUpFitters BlazeCut Fire Extinguisher, Installation Manual

Search results

Summary of Contents for BlazeCut Fire Extinguisher

Reviews:

Related manuals for BlazeCut Fire Extinguisher

Brands by name

Popular brands