manualshive.com logo in svg

3DR X8+, Operation Manual, Page: 18 / 36

Share
Download
3DR X8+ Operation Manual Download Page 18

16

Activate

Hold until propellers 

start spinning.

Take-off + Lift

Raise just slightly 

for take off

Hover + Land

Lower just slightly

to hover

Left Yaw

Left

Back

Forward

Right

Right Yaw

Deactivate

Hold until propellers

stop spinning

Activate

Hold until propellers 

start spinning.

Take-off + Lift

Raise just slightly 

for take off

Hover + Land

Lower just slightly

to hover

Left Yaw

Left

Back

Forward

Right

Right Yaw

Deactivate

Hold until propellers

stop spinning

Move the right 
stick forward 
to fly forward.

right stick

Move the right 
stick back to fly 
backward.

The right stick allows you to control the X8’s position in the air. Move the right stick to tell the 
X8 to move in that direction: forward (toward the blue arms), back (toward the black arms), 
left (toward the left arms), or right (towards the right arms). How far you move the stick from 
the center before releasing it tells the X8 how fast to move. 

Activate

Hold until propellers 

start spinning.

Take-off + Lift

Raise just slightly 

for take off

Hover + Land

Lower just slightly

to hover

Left Yaw

Left

Back

Forward

Right

Right Yaw

Deactivate

Hold until propellers

stop spinning

Activate

Hold until propellers 

start spinning.

Take-off + Lift

Raise just slightly 

for take off

Hover + Land

Lower just slightly

to hover

Left Yaw

Left

Back

Forward

Right

Right Yaw

Deactivate

Hold until propellers

stop spinning

Move the right 
stick left to fly 
left.

Move the right 
stick right to fly 
right.

Flight Tip

The X8 moves according to its orientation. The blue arms face forward, and the black 
arms face backward. Before using the right stick, use yaw to keep the X8 facing in 
outward orientation so that the black arms face towards you and the blue arms and face 
away from you.

Pitch and Roll

Summary of Contents for X8+





































Reviews:

No comments