3DP Moving and Folding the Gantry
Approved By:
Date: <6/14/2016>
Page 11 of 11
WI XXXX-xxxxxx
–
3DP Moving the Printer
Step 9: Returning the system to use.
With the cart in place, return the unit to its original location on the cart. Align the back
plate of the unit with the two edges of the handle bracket at the rear of the machine.
Step 10: Plug in cables.
With the unit in place, plug all removed cables back into their proper place taking care to
ensure the cables are in the correct locations on the control box. After all the cables are
secure plug unit into the power source and then follow the start up proccedures that come
with your unit.
