28/ 31
10. Maintenance
Your MID is a product of superior design and craftsmanship and should be used with care.
The following suggestions will help you protect your warranty coverage.
1. maintain the drying of the MID. Rain, humidity and all types of liquids or moisture can
contain minerals that will corrode electronic circuits.
2. Do not use or store in dusty, dirty place MID. This will damage its moving parts and
electronic components.
3. This MID, Do not store in hot areas.
4. Do not the MID stored in a cold place. When the MID to normal temperature, its internal
temperature, moisture can form inside, which may damage the circuit board.
5. Do open the MID as described in this manual, do not try the other methods.
6. Do not drop, knock or shake the MID. Rough handling MID will break internal circuit board.
7. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the MID.
8. Do not paint the MID. Paint can disturb the moving parts and prevent proper operation.
9. to use clean, dry & soft cloth to clean the lens
(for example, camera lens)
10 Please use the charger indoors.
if you can not then boot failure occurred, advice clients to re-fired version.
These suggestions apply equally to your MID, chargers and various accessories. If any of the
MID is not working properly, take it to your nearest authorized service facility for repair.
11. Important Safety Information
11-1 Safety precautions
*** Precautions when hand carrying
Remember to follow any special regulations in force, In place to prohibit the use of the
MID may cause interference or danger, be sure to turn off the MID.
Whether it is in the normal operating position of the ear, or at least 2.5 centimeters
location use and body position to use the MID. The MID meets RF exposure guidelines. If
you are using a MID clip to carry the MID, you should ensure that such accessories not
contain metal and should maintain this
MID with the physical distance of at least 2.5 cm.
*** RF energy leakage
Your MID is a low-power radio transmitter and receiver. Boot will receive and transmit
radio signals intermittently. The network system will control the transmit power of the MID.
This unit conforms to your country for RF energy leakage provisions.
***RF interference compatibility
