3Dlabs Wildcat III 6110, User Manual

Page: 26 / 56

Software Configuration
3Dlabs Graphics Accelerator Card User's Guide
Using the Wildcat Monitor tab
1. On the Display Properties dialog box, click the Wildcat Monitor tab. This tab contains
commands for adjusting the resolution, color depth, and refresh rate. See the steps under
Using the Wildcat Configuration tab if you need instructions on opening the Display
Properties dialog box.
2. Click Color Calibration to modify the color settings. Make modifications to the Color
Calibration dialog box, then check the Apply Gamma Color Calibration to 3D Windows
Only box if you don’t want the desktop affected. Click OK to accept the changes and
dismiss the Color Calibration dialog box, or click Cancel to close the Color Calibration
dialog box without making any changes. You are returned to the Wildcat Monitor Display
Properties dialog box.