16
STREET KART user manual
Street kart assembly
27.
Secure front bodywork with
M1.6x3mm
and
M1.6x6mm
screws.
28.
Insert two 2x5x2,5mm bearings
in each spindle. Insert
2x5x2,5mm bearing on
each side to the rear
axle bearing mount.
Street kart assembly
29.
Insert
M2.0x14mm
screws as front
axles. Use small piece of
tape or thread to achieve
perfect fit of screws in
bearings without wobble.
30.
Cut 2mm brass rod to
77,5mm length. Use file or
rotary tool to make three
notches on axle as shown
below. If the axle does not
go into the bearing easily,
sand its surface a little. Install
axle gear to its place and secure it
with
M1.6x3mm
screw. The screw tip
should touch the notch on the axle to
fix it on place. Use grease for smooth
movement of the gears.
77,5mm
10mm
8,2mm
2,4mm 2,4mm
2,4mm
10mm
Summary of Contents for Printed Racers Street Kart
Page 1: ...a printed_racers I STREET KART user manual ...
Page 12: ......
