3Dconnexion SpaceMouse Enterprise | 8
Navigation Modes
Object Mode enables Object Mode navigation - this mode is like reaching into the screen and holding the model in your hand.
Push the SpaceMouse cap left, and the model moves left. Push right and the model moves right.
Camera Mode enables using the Controller Cap as if it is a camera. Push into the scene and the camera moves forward into
the scene. Push left and the camera moves to the left (the scene moves to the right). Lift up and the camera moves up (the
scene moves down). You are entering the scene as if walking around in it.
Target Camera Mode enables Target Camera Mode navigation. Manipulate the SpaceMouse cap as if it is a target camera. Push
into the scene and the camera moves forward into the scene. Push left and the camera moves to the left (the scene moves to
the right). Lift up and the camera moves up (the scene moves down). When rotating the cap in any direction you will orbit
around the target point (see Rotation Center below).
Helicopter Mode enables a Camera Mode navigation but pushing the cap forward while looking down will not change the
altitude of the camera.
Lock Horizon forces the horizon to be kept leveled as it currently is.
Rotation Center
Auto sets the center of rotation dynamically. When the complete model is in view, the center of volume of the whole model is
used as the rotation point. When you move closer, the center of rotation will be set on an object close to your center of the
view.
Use selected Item forces the rotation center to only take the currently selected objects into account.
Always Show always visualizes the Rotation Center.
Show on Motion will visualize the Rotation Center only during movement.
Hide will disable the Rotation Center visualization.
Other Options
The applications below feature special options. More information can be found in the
Autodesk 3ds Max, Autodesk Maya, Solid Edge, SOLIDWORKS
