background image

3

www.3dtender.com

In the hypotetical case where the product have to be refunded. An annual depreciation of 20% 
will be applicated on the price indicated on the original invoice and from the date the product is 
sold.

HOW TO OBTAIN THE WARRANTY :

The customer must provide 3D Tender boats with a reasonable opportunity to repair, and rea-
sonable access to the product for warranty service. Warranty claims shall be made by delivering 
the product for inspection to a 3D Tender dealer authorized to service the product.
If the service provided is not covered by this warranty, the purchaser shall pay for all related labor 
and material, and any other expenses associated with that service.
The purchaser shall not, unless requested by 3D Tender, ship the product or parts of the product 
directly to 3D Tender.
3D TENDER or his authorized dealer will decide if they have to repair the defective part under 
warranty or not.
Proof of ownership must be presented to the dealer at the time the warranty service is request-
ed in order to obtain coverage.
The warranty require this inspection of the boat 12 months after the date of purchase by an 
authorized agent. Every defects on the boat will be repaired under warranty.  The servicing and 
transportation will be supported by the user, as well as all the damages caused by the use of 
the product.

WHAT IS NOT COVERED :

The limited warranty does not include the following elements :
1. An inadapted storage or transport, or any other use contrary to the instructions of this manual. 
2. The deterioration due to natural elements, the perforation, the discoloration, the oxidation, 
the abrasion, the moulds
3. Dammages due to loss or theft.
4. Wearing parts, including keel guard, ropes and rubbing strake.
5. Reparation without autorisations, as well as modifications or alterations of all coponents or 
part of the boat.
6. This warranty will not be possible if the boat has been used with an incorrect tube pressure or 
with an outboard motor that exceed the maximum power indicated on the manufacturer’s plate 
fixed on the transom of the boat. 
7. Slighter dammages on FRP hulls, such as :
- Slight damage on the gelcoat, cracks, protuberances and runs.
- natural loss of color due to weather conditions, or due to a contact with agressive and contam-
inant environnements.

Summary of Contents for XPRO 445


















Reviews: