background image

4

www.3dtender.com

8. Using the boat for races or any activity of competition cancel the limited warranty.
9. Works of assembly and disassembly the equipments of the boat, as well as transportations to, 
and from the service station are at the expense of the owner.
10. Expences linked to towing, rental, insurance, loan, loss of use, loss of income, or any other  
direct or indirect dammages are not covered by this warranty.
11. On all boat equipped with an aluminium hull, an anode is compulsory in order to avoid all 
problemes linked to electrolysis. Any use of a alumium boat without an anode cancel the limited 
warranty of the boat.
12. On the models XPRO 589, 535, 490 et 445, the hull has not been design to create cable 
passage. All cable passage must be on the deck in a sleeve. Any drilling of the composite wall 
cancel the limited warranty of the boat. 

TRANSFERT OF WARRANTY :

The limited warranty is transferable to a subsequent purchaser, but only for the remainder of 
the unused portion of the limited warranty. This does not apply if the vessel is used for rental 
or commercial use. To transfer warranty, plese send an email with the below information to : 
[email protected]
– Copy of the sale agreement
– HIN number of the craft
– Name, adress, email address of the new owner

Danger

Denotes that an extreme intrinsic hazard exists which would result in high probability of 
death or irreparable injury if proper precautions are not taken.

SAFETY ALERTS :

This manual uses the following safety alerts to draw your attention to special safety instruc-
tions that should be followed.
Degree of hazard and correspondingsafety labels :

Warning

Denotes that hazard exists which can result in injury or death if proper precautions are not 
taken.

Caution

Denotes a reminder of safety practices or directs attention to unsafe practices which 
could result in personnal injury or damage to the craft or components or to the environ-
ment.

Summary of Contents for XPRO RIB Aluminium 420



















Reviews: