1
INTRODUCTION
Thank you for purchasing the 3D Systems Atmosphere. Please read this guide carefully to enjoy optimum process performance
and longer equipment service life. The Atmosphere is a chamber regulation unit for the Gravity SLS 3D printer. The Atmosphere
provides improved control of build chamber conditions in the SLS 3D-printer Gravity for increased part density, surface finish,
and mechanical performance. The Atmosphere communicates with the Gravity‘s software and creates a more stable thermal
environment during the printing process.
Copyright and Corporate Identity
Aurora PA11
®
with regard to printers is a registered trademark of 3D Systems. Aurora PA11 Food Grade
®
with regard to
materials is a registered trademark of 3D Systems. Aurora PA12
®
with regard to printers is a registered trademark of 3D
Systems. Aurora TPU
®
with regard to printers is a registered trademark of 3D Systems. Aurora PP
®
with regard to printers is a
registered trademark of 3D Systems
Improvements
3D Systems may (but shall not be obligated to) make improvements to this document from time to time. However, the Licensed
User acknowledges that at any time after the expiration of the date of issuance, 3D Systems may institute a periodic charge or
fee payable by the Licensed User in return for ongoing receipt of improvements. It is the responsibility of the Licensed User
to provide 3D Systems with current information as to its name and address. The Licensed User also undertakes to notify 3D
Systems promptly in the event that it considers any of the data contained in this document to be incomplete or erroneous in
any respect, in connection with the Licensed User's particular or general use.
FCC Notice
United States
Class 1 Laser Product Statement of CDRH Compliance - This product conforms to the applicable requirements of 21 CFR,
Sub-chapter J at the time of manufacturer.
Statement of FCC Compliance - This product complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Korea
3D Systems, Inc.
1
p/n 74-D003, Rev. A