3D Systems sPro, User Manual

Page: 236 / 280

SLS p r o c e s s 2 3 6 B O S
u s e r ’ s g u i d e u s i n g t h e B O S d i a g n o s t i c s m e n u
3
Use to switch the Air Cyl Valve ON or
OFF , then, press .
4
Press to save the status, or press to
keep the status as-is and return to the Valves
menu.
VIEW OR CHANGE RCM POWER RELAY AND
STACKLIGHT OUTPUTS
Use the General Outputs menu to view the status
of the RCM Power Relay and Stacklight lamp
outputs, or to manually switch the RCM Power
Relay or individual Stacklight lamps off or on.
The outputs on the General Outputs submenu
(under the Force Output menu) perform the BOS
operations below.
Air Cyl Valve display
Air Cyl Valve
OFF
BOS OUTPUT STATUS OPERATION
RCM Power Relay
ON
Switches on (closes) the RCM power relay, supplying power to the part piston
motor on the RCM connected to the BOS
OFF
Switches off (opens) the RCM power relay, removing power from the part
piston motor on the RCM connected to the BOS
Lamp Color
ON Switches on the Color Stacklight lamp
where Color is Red, Yellow, Green ,
or Blue
OFF Switches off the Color Stacklight lamp