4.
With the bed flipped over, slide the
brown tab of the bed FPC
connector towards the rear of the
bed to release it, allowing the flex
cable to easily slide out.
5.
On the UP Mini Bed+, open the
FPC connector in the same
manner as previously. Then with a
cloth on top of the build platform,
place the UP Mini Bed+ upside
down on the build platform with its
FPC connector closest to the rear
of the printer.
6.
Ensuring that the silver contacts
are facing down onto the bed and
the blue plastic shown on the rear
of cable is visible and facing away
from the bed, insert the FPC cable
into the connector;
7.
Push the brown tab of the
connector towards the front of
the printer to lock the cable in
place, then flip the UP Mini Bed+
over such that the FPC cable is no
longer twisted.
