3D
Perception C
OMPACT
V
IEW
C
LAN
Revision
3
User
Manual
3
3. S
AFETY
3.1 Safety
This device complies with relevant safety regulations for data processing equipment for use in
an office environment.
Before using the projector for the first time, please read the safety instructions thoroughly.
3.2 Safety
Instructions
Use only the cables and cords supplied with the projector or original replacement cables. Using
other cables or cords may lead to malfunction and permanent damage of the projector
Only ever open the projector to change the lamp. The projector contains no other user
serviceable parts. Refer all repairs to qualified personnel only.
When changing the lamp always replace it with a lamp of the same type and rating.
Make sure that no objects enter into the vents and openings of the set. Do not spill any liquids
on the projector or into the vents or openings of the projector.
Do not look into the projection lens when the projector is switched on. The strong light may
permanently damage sight.
Do not look into the laser beam when activated on the remote control. Laser light may
permanently damage sight. Do not point the laser beam at other people.
Place the projector on a stable surface, or mount it securely using an approved ceiling-mount.
Do not drop the projector.
Always operate the projector horizontally. Operating the projector in other positions may reduce
the lamp life significantly, and may lead to overheating, resulting in malfunctioning.
Always allow ample airflow through the projector. Never block any of the air vents. Never cover
the projector in any way while it is running. Allow for sufficient distance to walls and ceilings to
avoid overheating.
The projector is designed for indoor use only. Never operate it outdoors.
Do not operate the projector outside its temperature and humidity specifications, as this may
result in overheating and malfunctioning.
Only connect the projector to signal sources and voltages as described in the technical
specification. Connecting to unspecified signal sources or voltages may lead to malfunction and
permanent damage of the projector.
