QMS 1725E Print Sytem Operation
3-4
Collating Output
With sufficient memory (12MB minimum) or a hard disk installed, the
QMS 1725E Print System can deliver multiple copies of your files in
collated order to the face-down output bin without having to send the
file repeatedly. This feature dramatically reduces your data transmis-
sion and improves performance. The illustration below shows collated
and uncollated stacking for two copies of a three-page file.
The face-down output bin has an offset stacking feature that when
enabled, offsets the multiple copies of a print job. With a hard disk
installed, collation performance is greatly improved because the file is
stored in QMS-compressed format for repeated printing. When disk
space is consumed during a print job, the printer begins chunk collat-
ing. Chunk collation breaks a job into sections and performs collation
on each of those sections. The next diagram shows the printing
Menu
Operator Control/Chain Inputbins
Choices
On—turns on tray chaining.
Off—turns off tray chaining.
Default
On
Notes
Use the Operator Control/Inputbin menu to set the
default input bin.
1
2
3
1
2
3
1
1
2
2
3
3
Collated
Uncollated
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
