3D Joy JoysmakerR2 3D, User Manual

Page: 5 / 33

www.3djoy.cn
 Do not hit the frame to cause deformation.
 Do not disassemble the machine, so as not to break the machine.

Long time not using the machine, seal the machine and store
it. Next time you use it you need to daub grease.
 Do not press the printing head, or else the 6mm rod may bend,
hence the printing quality may be affected.

Unplug the wires during thunderstorm weather.

To replace the nozzle, you need to heat the nozzle firstly till
the filament is melted.
C.JoysmakerR2 User Guide

In order not to break the machine during transport, we put the
extruder and the machine separately.

When receiving the machine, assemble it according to our user
guide.