4
Using the Display
The Mode Select Button
Press the
Mode Select Button
to select what
the bottom number displays.
Each time you press the
Mode Select Button,
the mode changes between the 4 modes
below:
1. SCAN (RPM, TIME and CALS)
2. RPM
(Revolutions Per Minute)
3. TIME
(Time)
4. CALS
(Estimated Calories)
SCAN Mode
When the
Scan Mode Indicator
is visible, the
lower number will cycle between displaying
RPM, Time and Calories. Each will be
displayed for about 5 seconds at a time.
There are two numbers on the display; one on the top and one on the bottom. See the image below.
• The
Top Number
always displays the total number of revolutions you’ve pedaled the bike since the
display was last reset. The display will keep track of up to 99,999 revolutions.
• The
Bottom Number
displays RPM, Time or Calories.
TIME Mode
When the
Time Indicator
is visible, the bottom number displays the
total time you’ve used the bike since the display was last reset. The
image to the right shows 26 minutes and 25 seconds.
RPM Mode
When the
RPM Indicator
is visible, the bottom number
displays your average pedal speed in Revolutions Per Minute. The
image to the right shows 0 RPM, which means the bike is not being
pedaled. Also note that the
Pedaling Indicator
is not displayed.
CALS Mode
When the
Calorie Indicator
is visible, the bottom number displays an
estimate of the number of calories burned since the display was last
reset. The image to the right shows 190 calories.
How to Reset Revolutions, Time and Calories
Time, Distance and Calories are accumulated as you pedal. To reset these all to zero, simply press and
hold the
Mode Button
for about 3 seconds.
How to Turn the Display On and Off
The display automatically turns on when you pedal the bike. You can also turn the display on by
pressing the
Mode Button
. The display automatically turns off a few minutes after you stop pedaling.
