9
Install the elevator half with the fiberglass joiner rod onto the stabilizer. Makes sure it flexes easily at
least 45 degrees up and 45 degrees down, and has approx 1/32” of gap in the hingeline. Apply thin CA
glue to the hinges, 2 large drops on each.
Place a piece of removable tape on the elevator counterbalance as shown. This will hold the right side
elevator in perfect alignment with the horizontal stab. Install the other side elevator without glue and look
at its alignment. Make sure you can align both elevators, sand the elevator joiner slot in the elevator if
necessary. Make sure you are happy with the alignment of the elevators.
