3D Hobby Shop 30CC Series, Manual

Page: 11 / 22


Screw the ball link onto the horns.

Connect the pull-pull wire and control horn with ball link.

Thread the cable connecter halfway into the ball link .

Pass the cable into the fuselage through the slot .

Install the rudder servo .

Prepare the rudder servo arm (we advise you to use long servo
arm)attaching two ball links by using the Screws and lock nuts.

Center the rudder servo and place the servo arm onto the servo.’

Slide a crimp onto the cable ,connect the cable and cable connecter like other end ,but do not use crimping
tool,let the crimp can remove freely.

Repeat these steps to install the second rudder cable.

Adjust the position of the eonnecter end on the cable.

Use a crimping tool to fix the crimp and cable.

Rotate the connecter or ball link to tension the cables.