5
Assembling the servo tray
-
Trim the servo arm down so that the fourth hole is the outermost hole.
-
Screw or hot glue the servos in place.
-
Glue the m6 nylon nuts in their slots in the underside of the servo tray.
-
Thread fishing line through the 4 holes at the rear of the tail and connect the ends to
the servo arms for both servo’s. Place a drop of CA on the knot to secure it. Be sure to
leave plenty of excess to be attached to the elevators later on.
Summary of Contents for TRACER 2000
Page 1: ...ASSEMBLY MANUAL AND USER GUIDE TRACER 2000 Thermal glider By 3D AEROWORKS ...
Page 3: ......
Page 4: ......