3Com VCX V7000, Manager'S Manual

Page: 53 / 118

Controlling Caller ID 53
To view the User Directory, use one of the following access options:
■
Select the Directory soft button. By default, the display sorts the
names alphabetically by last name. You can change the sort order to
first name or extension by selecting the appropriate tab on the display.
Use the up and down scroll buttons to locate a user. When you have
located the user, select the
Dial soft button to automatically call the
user.
You can also use the directory while you are on a call to find another
user and transfer the call to that user.
■
Select the Features soft button and enter 461 .
Controlling Caller
ID
This section describes how to enable and use Caller ID privacy features.
By default, the VCX system shows your Caller ID (your name and
extension) on the Display Panel of the telephone receiving your call if that
telephone supports Caller ID. You can control whether the VCX system
sends your Caller ID when you make a call. You can choose one of the
following settings:
■
Select one of the following settings for all your calls:
■
Send Caller ID information (Anonymous All is disabled).
■
Block Caller ID information (Anonymous All is enabled).
■
Block Caller ID information for your next call. This setting only applies
when the setting for all calls is set to Send Caller ID information . You
must enter the destination number to call.
Anonymous All — When enabled, the system blocks your Caller ID to all
dialed numbers and Anonymous displays on the destination phone.
Anonymous Next — When enabled, the system restricts Called ID
information from displaying only on the next call that you make. This
setting only applies when Anonymous All is disabled, or the setting for all
calls is set to
Send Caller ID information .
If you disable Caller ID, the system sends your Caller ID to all dialed
numbers.