3Com VCX V7000, Maintenance Manual

Page: 152 / 344

152 C
HAPTER
10: M
ANAGING
U
SER
A
CCOUNTS
U
SING THE
C
OMMAND
L
INE
I
NTERFACE
To use the
user-MAC
command:
1 Log into the primary VCX server using the cworks account.
2 Enter the following command:
cd /opt/3com/VCX/vcxdata/bin
You can now enter the
user-MAC
command in either single user mode or
batch mode. See the sections in this chapter for a description of each
mode, the required syntax, and examples. For online help with command
syntax, enter the following command:
./user-MAC --verbose-help
When you execute the
user-MAC
command, console output indicates the
progress of the requested action and provides a summary when finished.
Using Single User
Mode
You can use the
user-MAC
command in single user mode to add modify,
or delete one user account at a time.
In single user mode, the
user-MAC
command can take the parameters
shown in Table 14
Table 14 user-MAC Command Parameters
Parameter
(full name/abbreviation)
Takes
Value?
Mode
Parameter
Type
Description
--help or --h No Both None Returns text describing command usage.
--csv Yes Batch CSV file Indicates command input is a comma
separated value (CSV) file. The parameter
value specifies the name of the CSV file.
--debug or- -deb Yes Both integer For internal use.
--delete or --del No Single None Deletes the specified user account.
--mod or --mo No Single None Modifies the specified user account.
--non-stop or- -no No Batch None Indicates that command process in batch
mode should not halt because of processing
errors.
--xml Yes Batch XML file Indicates command input is an XML file. The
parameter value specifies the name of the
XML file.