54
C
HAPTER
5: S
TANDARD
F
EATURES
Using the Telephone User Interface
You can control Caller ID settings using the Telephone User Interface by
enabling the appropriate feature.
To change the current setting using the Telephone User Interface, select
Features
. Use the Scroll buttons to navigate through the features.
If Caller ID (Anonymous All) is disabled and you want to block your Caller
ID for the next call only:
1
Pick up the handset.
2
Select the
Features
soft button.
3
Use the Scroll buttons to navigate to
Anonymous Next
.
4
Press the
Select
soft button.
5
Dial the number. Your ID is not sent to the caller.
Using the VCX User Interface
You can control Caller ID settings using the VCX User Interface by
enabling the appropriate feature.
To change the current setting using the VCX User Interface:
1
Log into the VCX User Interface and select
My Extensions
and then
select the
Button Mappings
tab.
2
Select the 3103 Manager phone.
3
In any one of the top three
Feature Type
pull-down windows, set the
type to
Anonymous All
if you want to block your Caller ID for all calls, or
select
Anonymous Next
to block your Caller ID for the next dialed
number. These feature types are mapped to your phone’s Access buttons.
4
Click
Save
and log out.
5
To block Caller ID information for all calls, press the Access button
associated with
Anonymous All
. The LED will go on, indicating that the
feature is enabled.
6
To block Caller ID information for only the next dialed call, press the
Access button associated with
Anonymous Next
. The LED goes on,
indicating that you enabled the feature. When you complete the call, the
LED goes off.
Summary of Contents for VCX V7000
