3Com V6100, Installation Manual

Page: 41 / 47

Figure 16 File Successfully Loaded into the V6100 Notification
5 Note that the four action buttons ( Cancel , Reset , Back , and Next ) are now activated
(following cmp file loading).
You can now choose to either:
ƒ
Click Reset ; the V6100 resets, utilizing the new cmp you loaded and utilizing the
current configuration files.
ƒ
Click Cancel ; the V6100 resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
ƒ
Click Back ; the ‘Load a cmp File’ screen is reverted to; see Figure 15 .
ƒ
Click Next ; the ‘Load an ini File’ screen opens; see Figure 17 . Loading a new ini file
or any other auxiliary file listed in the Wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading is
in process by illuminating green (until ‘FINISH’).
Figure 17 Load an ini File Screen
V6100 Digital Gateway Installation Guide
41