3Com Switch 8807, Configuration Manual

Page: 874 / 883

874 C
HAPTER
78: P
ASSWORD
C
ONTROL
C
ONFIGURATION
System Logging
Function
The system can automatically log related information in case of the following
events:
■
When a user logs in successfully, the system will log the user name, IP address,
and VTY number
■
When a user is prohibited by the ACL rule, the system will log the user’s IP
address
■
When a user fails in authentication, the system will log the user name, IP
address, VTY number, and failure cause
■
When a user changes his or her password that has expired, the system will log
the password change event
The administrator can query the login information of users based on these log
records.
Password Control
Configuration Example
Network requirements
A PC is connected with an Switch 8800 Family switch. You can either use the
default configuration or configure the password control parameters as required.
Network diagram
Figure 204 Network diagram for password control configuration
Configuration procedure
# Configure the system login password:
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] local-user test
[3Com-luser-test] password
Password:**********
confirm:**********
Updating the password file, please wait ...
# Change the system login password to 0123456789:
[3Com-luser-test] password
Password:**********
Table 826 Configuring the timeout time for password authentication
Operation Command Description
Enter system view system-view -
Configure password timeout
time
password-control
authentication-timeout
authentication-timeout
The value range of password
authentication timeout time is
30 to 120 seconds, and the
default value is 60 seconds
console
3&
Switch
console
3&
Switch
console
3&
Switch
PC
LSW
console
3&
Switch
console
3&
Switch
console
3&
Switch
PC
LSW