Editing User Details
4-5
Editing User Details
These steps assume the User Access Levels screen is
displayed.
1
Select the EDIT USER option. The Edit User screen is
displayed, as shown in
2
Fill in the fields as required.
3
When you have completed the changes, select OK.
The Edit User screen shows the following fields:
User Name
This read-only field shows the name of
the user. This field cannot be changed; if you need
to change the user name, you must delete this user
and create a new one.
Old Password
This field allows you to enter the old
password for the user.
New Password
This field allows you to enter a new
password for the user.
Confirm Password
This field allows you to re-
enter the new password for the user.
Community String
This field allows you to enter a
new community string for the user.
If you forget your password while logged out of
the VT100 interface, contact your local technical
support representative who will advise on your next
course of action.
Figure 4-5
Edit User screen
Summary of Contents for SuperStack II Switch 3000 10/100
