3Com SuperStack 3 WEBCACHE 1000, User Manual

Page: 153 / 362

3Com Web Site Filter 153
6 Check the various Web site categories that you want to block when the
Category Set is active.
7 If you want to remove the Category Set from the list, click on an entry in
the list and click
Remove . To delete all entries at once, click Remove All .
8 Click OK .
Setting up the Policy Schedule
The Policy Schedule determines the time of day and days of the week
when the various Category Sets should be used for content filtering by
the Webcache.
You can schedule policies that overlap. When this happens a category will
be filtered if either policy is set to filter that category. This can, for
example, be used to set a ‘baseline policy’ that applies at all times adding
additional categories during core work hours.
To set up the Policy Schedule using the Web interface:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
3 Select Webcache Filtering > 3Com Web Site Filter > Policy Schedule in the
Navigation Tree.
4 Click Add , to add a policy to the Policy Schedule.
5 Select the Category Set, that you want to assign to the policy, from the
Assign Category Set window.
6 Click Edit .
7 Select the days and the times for when this Category Set should be
applied. Repeat this for each Category Set that you have created and
want to add to the Schedule Policy, then Click
OK .
The Policy Schedule should now display all the defined policies.
8 Click OK , to close the Policy Schedule.
Editing the Policy Schedule
To edit the Policy Schedule:
1 Log in to the Web interface.
2 Click Content Filter on the Toolbar.
dua1611-5aaa04.book Page 153 Friday, November 29, 2002 8:56 PM