Transparent Polled Async
7
Configuration
PAD Profile Table Parameters
List of Parameters
Listed below are descriptions of the PAD Profile parameters that must be configured
when using Transparent Polled Async. Refer to the Configuring for APAD/ATPAD
Manual for a complete listing of PAD Profile parameter descriptions.
Data Forwarding Character (#3)
Range:
0 to 127
Default:
2
Description:
Selects the ASCII characters used for data forwarding. NOTE: A
setting of zero disables this parameter.
Refer to the Configuration Basics Guide for the ASCII Table.
Idle Timer Delay (#4)
Range:
0 to 255
Default:
0
Description:
Selects forwarding idle timer delay in increments of 50
milliseconds. A setting of 0 disables the Idle Timer.
PAD Mode (#114)
Range:
0 to 2
Default:
0
Description:
This parameter selects PAD Operational Mode
• 0: Normal PAD Operation
• 1: Transparent Polled Async Host PAD
• 2: Transparent Polled Async Remote PAD
Note
Normal PAD operation deactivates Parameters #115 through #118.
To operate TPA, or use the TPA 2K Frame Size Increase feature,
set Parameter #114 to 1 for Host PAD and 2 for Remote PAD.
Summary of Contents for PathBuilder S200 Series
