3Com OfficeConnect WX1200, Reference Manual, Page: 98 / 520

98 C
HAPTER
5: P
LANNING THE
3C
OM
M
OBILITY
S
YSTEM
To create RF obstacles by grouping objects
You can group several objects in a drawing to specify them as one RF
obstacle. For example, if a wall consists of several lines, the lines can be
grouped. If you subsequently ungroup the objects, the RF obstacle
information is removed.
1 Select an object on the floor.
2 Press Shift while clicking additional objects.
3 Click the (group objects) icon on the toolbar. The grouped objects
now appear as one object group.
4 Right-click, and select Create RF Obstacle . The Create RF Obstacle
dialog box appears. See “To use the Create RF Obstacle Dialog box”.
To use the Create RF Obstacle Dialog box
The Create RF Obstacle dialog box is shown in Figure 4.
Figure 4 Create RF Obstacle Dialog Box
1 In the Description box, type a description for the RF obstacle (1 to 60
characters, with no tabs).
2 In the Obstacle Type list, select the material of which the RF obstacle is
made.
Select Other if the material is not listed. This allows you to create your
own obstacle type.