background image

A-2

A

PPENDIX

 A: CLI C

OMMAND

 D

ESCRIPTION

TFTP to export the updated file to the system’s FLASH file system, and use the 

verify filter

 command to check the filter’s syntax.

add ip defaultroute

gateway <IP_address>

{ metric [1] }

Defines a default gateway IP router, which acts as the default route for IP packets 
destined for remote hosts.

add ip network

<network_name>

address [ip_net_address]
frame [ETHERNET_II | SNAP | LOOPBACK]
{ interface [eth:1] }
{ enabled [yes] }

Adds an IP network to the list of IP networks available over the specified interface.

add ip route

<ip_net_address>

gateway [gateway_addr]

metric [hop_count]

Adds an entry to the IP routing table. IP packets destined for networks that match 
this network will be routed to this address. The command 

list ip routes

 displays 

your currently defined routes.

Parameters

Description

<filter_name>

Designation of a filter file, up to twenty ASCII characters.

Parameters

Description

<IP_address >

IP Address of the gateway router.

metric

Integer representing how far away the default router is, in “hops” through 
other routers. Values: 1-15.

Parameters

Description

<network_name>

Name of IP network, consisting of up to 32 unique ASCII characters; space 
must be surrounded by double quotes.

address

IP address of the network, in the format nnn.nnn.nnn.nnn, with or 
without a mask specifier. The Mask Specifier can be ‘A’, ‘B’, ‘C’, or ‘H’, or 
a numeric value from 8 to 30 that describes the number of one bits in the 
mask. If you do not specify a mask, the system will gener ate it for you 
from the network address.

frame

Frame encapsulation to be used on this IP network.  The options are: 
ETHERNET_II, LOOPBACK (for diagnostics), or SNAP.

interface

Name of the interface which this IP network will communicate over. The 
default is the first LAN interface (eth:1).

enabled

This optional parameter indicates whether the network is enabled (YES) or 
disabled (NO). YES is the default.

Parameters

Description 

<net_address>

IP address of the remote network, in the format nnn.nnn.nnn.nnn, with or 
without a mask specifier. The Mask Specifier can be ‘A’, ‘B’, ‘C’, or ‘H’, or a 
numeric value from 8 to 30 that describes the number of one bits in the 
mask. If you do not specify a mask, the system will generate it from the 
network address.

gateway

IP address of gateway used to reach this remote network.

metric

An integer representing how far away the route is, in “hops” through other 
routers. Values are 1-15.

Summary of Contents for HomeConnect 3CP3647











































































Reviews: