background image

the Software, if it is not earlier terminated. You may terminate it at any time by destroying the 
Software and documentation together with all copies and merged portions in any form. It will also 
terminate immediately if you fail to comply with any term or condition of this License Agreement. 
Upon such termination you agree to destroy the Software and documentation, together with all 
copies and merged portions in any form.

GOVERNING LAW:

 This License Agreement shall be governed by the laws of the State of California 

as such laws are applied to agreements entered into and to be performed entirely within California 
between California residents and by the laws of the United States. You agree that the United 
Nations Convention on Contracts for the International Sale of Goods (1980) is hereby excluded in 
its entirety from application to this License Agreement.

LIMITED WARRANTY; LIMITATION OF LIABILITY:

 All warranties and limitations of liability 

applicable to the Software are as stated on the Limited Warranty Card or in the product manual 
accompanying the Software. Such warranties and limitations of liability are incorporated herein in 
their entirety by this reference. 

SEVERABILITY:

 In the event any provision of this License Agreement is found to be invalid, illegal or 

unenforceable, the validity, legality and enforceability of any of the remaining provisions shall not in 
any way be affected or impaired and a valid, legal and enforceable provision of similar intent and 
economic impact shall be substituted therefor.

ENTIRE AGREEMENT:

 This License Agreement sets forth the entire understanding and agreement 

between you and 3Com, supersedes all prior agreements, whether written or oral, with respect to 
the Software, and may be amended only in a writing signed by both parties. 

3Com is a registered trademark of 3Com Corporation.

3Com Corporation

, 5400 Bayfront Plaza, P.O. Box 58145, Santa Clara, CA 95052-8145, 

(408) 764-5000

Summary of Contents for ETHERLINK III















































































Reviews: