Configuring Groups
41
Troubleshooting a Group
Configuration
Use the troubleshooting tips below to solve problems that may occur in a group
configuration.
To access a database of technical information that can help you diagnose and
solve NIC installation, configuration, and upgrade problems, go to:
Table 4
Troubleshooting Groups In NetWare
Symptom
Tip
More than two non-3Com server NICs
have been detected in one or more
groups on this server.
You can use only two NICs that are not 3Com server
NICs in one 3Com load balancing/RSL group per
server. Check the groups and remove all but two of
the non-3Com server NICs from the groups.