Configuring Software
3-5
T1/PRI NAC
1
From the Main Menu, select option 5 <or 6>,
Span Line 1 <2>
Configuration
.
This screen displays:
2
Select option 14.
This screen appears:
3
Type the necessary length and then press
Enter
to accept the value.
The default is 0–133 feet.
4
Return to the Main Menu.
Span Line 1 Configuration
Current Setting
1 Framing Mode
ESF
2 Line Coding
B8ZS
3 Remotely Initiated Loopback Ignore
4 Jitter Attenuation
Receiver
5 Switch Type (Boot time)
Config=5ESS(AT&T)Act.=5ESS(AT&T)
6 Idle Byte Sent to TELCO
FE Hex
7 DS0 to Modem Slot/Chan Mapping
8 Signaling Channel Config (Boot time)
Config=D-
channel Act.=D-channel
9 Interface ID
0
10 Span Level Call Type Blocking
No Call Blocked
11 Span Level Cause Codes
12 DS0 Level Call Type Blocking
13 DS0 Level Service State
14 Short Haul NIC Line Length 0-133
(NOTE: Changing configuration parameters may effect calls in
progress.)
Enter menu selection and press Return or press Esc to exit.
Menu Selection (1-14):
T1 Span Line 1 Short Haul NIC Line Length
1 0-133 feet
2 134-266 feet
3 267-399 feet
4 400-533 feet
5 534-655 feet
Enter menu selection and press Return or press Esc to exit.
Menu Selection (1-5):
