3Com CoreBuilder 9000, User Manual

Page: 145 / 468

Port Interface Type 145
Port Interface Type
You can configure the port interface type.
Display Port Interface Type
Update Port Interface Type
Reset NNI Configuration
See Chapter 11 for more information about port interface types.
Display Port Interface
Type
Display the interface type for each port of the CoreBuilder 9000 ATM
Enterprise Switch. The interface type is Gateway (GWY), User to Network
Interface (UNI) or Network to Network Interface (NNI).
Command Actions
Command Result
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(3) NNI: NNI Setup
(3) GIF: NNI Get Interface Type
Direct access sequence:
1 1 3 3
System action taken: The interface type for each port of the
CoreBuilder 9000 ATM Enterprise Switch is displayed.
System message display: Information is displayed as shown in the example.