3Com CoreBuilder 9000, User Manual

Page: 128 / 468

128 C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Display ILMI Channel
Polling Status
Display the ILMI channel polling facility status for the specified port of the
CoreBuilder 9000 ATM Enterprise Switch. If enabled, the ILMI channel
VPI/VCI = (0/16) is periodically polled for connectivity. For more
information, see “Status Information” on page 324.
Command Actions
Command Result
Example
Enter:
1 1 8 4 1 3.1.2
The following message is displayed:
ILMI polling is ENABLED.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(8) IME: ILMI Setup
(4) POL: Polling Setup
(1) GST: Get Polling Status
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
Direct access sequence:
1 1 8 4 1
[parameters]
System action taken: The ILMI Polling status for the specified port is
displayed.
System message display:
ILMI polling is <ENABLED/DISABLED>.