3Com 4210G Series, Getting Started Manual, Page: 66 / 78

5-5
4) Change the rate of the serial port on the terminal
To ensure communication between the terminal and the switch, the baud rate of the serial port on the
terminal should be consistent with that of the console port on the switch.
Step1
Select
Call
>
Disconnect
in the HyperTerminal window to disconnect the terminal from the switch.
Figure 5-1
Disconnect the terminal from the switch
Step2
Select
File
>
Properties
. In the
Properties
dialog box, click
Configure
(as shown in Figure 5-2 ), and
then select
115200
from the
Bits per second
drop-down list box (as shown in Figure 5-3 ).
Figure 5-2
Properties dialog box