manualshive.com logo in svg

3Com 4200G 12-Port, Getting Started Manual

Share
Download
3Com 4200G 12-Port Getting Started Manual Download Page 29

Choosing the Correct Cables

29

CAUTION:

If you want to install the Switch using a Category 5E or 

Category 6 cable, 3Com recommends that you briefly connect the cable 
to a grounded port before connecting network equipment. If you do not, 
the cable’s Electrostatic Discharge (ESD) may damage the Switch's port.

You can create a grounded port by connecting all wires at one end of a 
UTP cable to an earth ground point, and the other end to a female RJ-45 
connector located, for example, on a Switch rack or patch panel. The 
RJ-45 connector is now a grounded port.

3Com recommends that you use Category 5 twisted pair cable—the 
maximum segment length for this type of cable is 100 m (328 ft).

Choosing the Correct

Cables for the

Switch 4200G

All of the ports on the front of the Switch 4200G 28-Port are 
100BASE-FX MT-RJ multi-mode ports. The MT-RJ port is a small form 
factor fiber-optic port with the transmit and receive fibers in the same 
cable. Unlike many fiber-optic systems, only one MT-RJ cable is needed to 
connect two MT-RJ ports together.

To connect a front panel port to another 100BASE-FX MT-RJ multi-mode 
port, or to a patch panel, a single MT-RJ multi-mode pinless jumper cable 
is required. Since standard MT-RJ cables are cross-over cables, no 
Auto-MDIX sensing is required. The maximum cable length is 2 kilometers 
(1.24 miles).

CAUTION: 

Do not connect pinned MT-RJ connectors into any port on the 

Switch 4200G as this may damage the unit. The ports have locator pins 
fitted and are designed for standard (pinless) connectors.

To connect a front panel port to a 100BASE-FX single mode port, or to a 
port that does not have an MT-RJ connector, an adaptor will be required. 
It is not possible to connect a front panel port to a 1000BASE-FX port.

10014914AA.book  Page 29  Friday, July 7, 2006  2:08 PM

Summary of Contents for 4200G 12-Port









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands